Square Type Shim Pad :- Plastic shims are ideal for packing during erection of precast units. Shim pads are used for leveling Precast Concrete parts & facade elements to level and adjust concrete plate blocks etc. It is designed for use in concrete construction for leveling.. Levelling shims are used for alignment and levelling of pre-cast […]
PVC Horseshoe type shim pad :- PVC Horseshoe type shims which facilitates fitting around projecting bars. Shim pads are used for leveling Precast Concrete parts & facade elements to level and adjust concrete plate blocks etc. It is designed for use in concrete construction for leveling. Leveling shims are used for alignment and leveling of […]
Clip Spacer :-Structural elements such as flooring and beams are suitable for supplying the reinforcement of the reinforcement to the horizontal surface of the mold. Min. and max. There are types suitable for the height of the cover. They hold iron of all diameters easily and safely.They are stable elements with high bearing powers.
Wheel Spacers :-It has a wide range of uses. It has been used successfully not only in us but also in the whole world for many years. There are types suitable for all sizes of iron. The additional width given to the mop where the iron is seated prevents it from tipping over. Since its […]
Pile Cage Spacers :-Bored pile spacers are used in reinforced concrete piles applied in soil improvement and cast on site. If the iron reinforcement prepared in accordance with the pile hole previously drilled on the ground is lowered with the help of a crane, it is facilitated for the iron reinforcement to enter the soil […]
Dumbell Type Rebar Safety Cap :- Dumbell Type Rebar Caps is used to prevent the accidents by attaching to the ends of the studs or iron ledges in reinforced concrete constructions. It is produced in yellow or phosphorous colors to attract attention. PRODUCT NAME BAR SIZE PCS PER PACKAGE DAMRU TYPE REBAR CAP 08 – […]
PVC Cone:-It is the head which prevents the concrete grout from leaking into the sheath pipe of the stud used to keep the distance between reinforced concrete curtain-column and beam molds constant. At the end of the work, it can be closed with a special plug, or it can be dismantled and reused.
Water Reducer Cap:-In water structures, a special type of tie-rot is mounted on both ends of the water-retaining element and reinforcement of the mold is provided. There is a protective pipe outside the studs inside the mold. These are the connection elements that connect the protective pipe in the water trap element.
Metal Water Stopper :-In water structures, a special type of stud (Tie-rot) is mounted on each end of the water and reinforcement of the mold is provided. There is a protective pipe outside the studs inside the mold. After pouring the concrete, the studs are removed and after the mold is taken, the stud spaces […]
PVC Chamfer :- It is used in cases where chamfers are required in the corner form of two panels. It also provides the sealing of the mold. It is made of hard PVC. It can be used many times. Their standard length is 3 meters. PRODUCT NAME SIZE PACKAGING PVC CHAMFER 15MM 150 MTRS PVC […]
Shuttering Sleeve :-It is the pipes that ensure that the studs used in reinforcement of reinforced concrete curtain-column and beam molds do not come into contact with concrete during concrete pouring, can be easily removed from the mold and the distance between the molds is not spoiled. They are made of hard (PE) polyethylene and […]
Tile Leveling Clips and Wedges:- These wedges and clips are used in conjunction with tiles cross and floor tiles and wall tiles. PRODUCT NAME SIZES PACKAGING TILE LEVELLING WEDGES 1MM 100 PCS PER PACK TILE LEVELLING WEDGES 2MM 100 PCS PER PACK TILE LEVELLING WEDGES 3MM 100 PCS PER PACK TILE LEVELLING WEDGES 4MM 100 […]